WandererAstro Wanderer Rotator Mini V2

Wanderer Rotator Mini V2 - a lightweight and low-profile M54 rotator 

Compared with the Mini V1, a 12V power input port is added to improve the stability of the power supply

(Note: 12V power supply is required)

High Payload

Maximum payload of 5 Nm*

*The torque generated by the imaging equipment to the rotator must be less than 5 Nm. For example, if the center of gravity of the equipment is 10cm away from the rotator, the maximum weight of the equipment should not exceed 5kg.

Fast and Accurate

Rotation rate: 4.5 degrees/sec

Angular resolution: 0.01 degree

Ultra lightweight

Thanks to the excellent mechanical design and the use of high-strength materials, it weighs only 420g.

Ultra low-profile

At just 10mm thick, the thinnest M54 rotator yet, this is a marvel of design and manufacturing.

Please note that the length of the M54 male thread on either side must not exceed 5mm. The sum of the lengths of the M54 male threads on both sides must not equal 10mm. If exceeded, use a washer to reduce the effective thread length.

Zero flexure guaranteed

Patented magnetic design

Absolute zero flexure is guaranteed at any PA

De-rotation

For users of altazimuth and Dobson telescopes

Connect six devices simultaneously!

The ASCOM driver supports simultaneous and independent connection of up to six WandererRotators of any model!

Specifications

• Connectivity: USB2.0 Type B
• Power: 12V DC5521 0.5A max
• Clear aperture: M54
• Installation: Double-sided M54 female thread
• Thickness: 10mm (From M54 female thread to M54 female thread)
• Weight: 420g
• Rotation rate: About 4.5 degrees/sec
• Payload: The torque generated by the imaging equipment to the rotator must be less than 5 Nm

Please note that this product cannot be controlled through the ZWO ASIAIR app. WandererAstro's flat panels, camera rotators, dust covers and power boxes are controlled via their WandererEmpire app or other software that supports ASCOM such as N.I.N.A.